Yayın tarihi için Makale Koleksiyonu listeleme
Toplam kayıt 32, listelenen: 1-20
-
Load-to-failure resistance and optical characteristics of nano-lithium disilicate ceramic after different aging processes
(MDPI, 01.06.2022)The aim of this study was to compare the load-to-failure resistance and optical properties of nano-lithium disilicate (NLD) with lithium disilicate (LDS) and zirconia-reinforced lithium silicate (ZLS) in different aging ... -
Effect of printing layer thickness on the trueness and margin quality of 3d-printed interim dental crowns
(MDPI, 01.10.2021)The information in the literature on the effect of printing layer thickness on interim 3D-printed crowns is limited. In the present study, the effect of layer thickness on the trueness and margin quality of 3D-printed ... -
Effects of disinfectants on the dimensional stability of new-generation monophasic impression materials
(Hayat Sağlık ve Sosyal Hizmetler Vakfı, 01.2020)Aim: In this study, we aimed to compare the effects of different disinfectants on the dimensional stability of four different monophasic vinyl polysiloxane (VPS) dental impression materials. Materials and Methods: The four ... -
Effects of various chairside surface treatments on zirconia-resin cement bond strength
(Mashhad University of Medical Sciences, 03.12.2018)Introduction: Various surface treatments have been used to improve the adhesion of resin cement to zirconia restorations. The present study aimed to investigate the effects of different surface treatments on the bond ... -
Influence of 3D analysis software on measured deviations of CAD-CAM resin crowns from virtual design file: an in-vitro study
(Elsevier, 03.2022)Objectives: To evaluate a nonmetrology-grade and a metrology-grade 3D analysis software when measuring the deviations of computer-aided-design/ computer-aided-manufacturing (CAD-CAM) fabricated crowns from the virtual ... -
Congruence between the meshes of a combined healing abutment-scan body system acquired with four different intraoral scanners and the corresponding library file: an in vitro analysis
(Elsevier, 03.2022)Objectives: To investigate the congruence between the meshes of a combined healing abutment-scan body (CHA-SB) system acquired with four different intraoral scanners and the corresponding library file. Material and methods: ... -
Effect of different mouthwashes on discoloration of plaque-free tooth surfaces
(Mosher'ın & Linder, 04.08.2018)Purpose: To evaluate the tooth discoloration effect of the daily use protocol of six different mouthrinses. Methods: 70 extracted caries-free central incisors were divided into seven groups (n=10/per group) : Group 1: ... -
Wear behavior of current computer-aided design andcomputer-aided manufactur ing composites and reinforcedhigh performance polymers: An in vitro study
(Wiley, 04.10.2021)Objective: To analyze the wear rate of computer-aided design and computer-aidedmanufacturing (CAD/CAM) composites, polyetheretherketones and glass ceramics.Material and Methods: Our study groups were prepared from two ... -
Fracture resistance of single-unit implant - supportedcrowns: effects of prosthetic design and restorative material
(Wiley, 10.08.2021)Fracture Resistance Of Single-Unit Implant-Supported Crowns: Effects Of Prosthetic Design And Restorative Material Fracture Resistance Of Single-Unit Implant-Supported Crowns: Effects Of Prosthetic Design And Restorative ... -
Influence of coloring liquid immersion on flexural strength, vickers hardness, and color of zirconia
(Elsevier, 10.2021)Statement of problem: Zirconia is a widely used restorative material, yet its white color does not meet esthetic requirements and coloring is needed. However, the effects of different durations of coloring have not been ... -
Accuracy of single implant scans with a combined healing abutment-scan body system and different intraoral scanners: An in vitro study
(Elsevier, 10.2021)Objective: The aim of the present study was to evaluate the accuracy of single implant scans with a combined healing abutment-scan body (CHA-SB) system using different intraoral scanners. Methods: A partially edentulous ... -
Effects of mouthrinses on discoloration of CAD-CAM manufactured restorative materials
(Mosher & Linder, 12.2019)Purpose: To investigate the in vitro effect of four different mouthrinses on discoloration of popular CAD-CAM blocks. Methods: 40 specimens were prepared and then were divided into five groups (n = 8) for each CAD-CAM block ... -
Effect of prolonged application of single-step self-etching primer and hydrofluoric acid on the surface roughness and shear bond strength of CAD/CAM materials
(Wiley & Sons, 12.2020)This in vitro study aimed to assess the influence of different concentrations and durations of hydrofluoric acid (HF) and Monobond Etch & Prime (MEP) etching on the surface roughness (Ra) of different CAD/CAM materials and ... -
Effect of implant location and operator on the accuracy of implant scans using a combined healing abutment scan body system
(Elsevier, 12.2021)Objectives: To investigate the effect of implant location and operator on the accuracy of implant scans conducted with a combined healing abutment-scan body (CHA-SB) system. Material and Methods: A CHA-SB system was fixed ... -
Effect of thickness, cement shade, and coffee thermocycling on the optical properties of zirconia reinforced lithium silicate ceramic
(John Wiley and Sons Inc, 12.2021)Objective: To investigate the effect of thickness, cement shade, and coffee thermocycling (CTC) on the optical properties of zirconia reinforced lithium silicate (ZLS) paired with different shades of a resin cement. Materials ... -
Efficacy of uncommon surface treatment methods on titanium in order to improve bond strengths for adhesive cementation
(Taylor & Francis Ltd., 2016)The aim of this study is to comparison of effects of uncommon surface treatments, especially new alternatives on the adhesive strength between resin and titanium surfaces. Fifty-five titanium disks were prepared and they ... -
Evaluation of clinical occupational injuries in dental students at their first clinical education year
(Hacettepe University, 2019)Abstract:Background and Aim: Gathering information about thevarious clinical occupational injuries in the dentistry is importantin terms of identifying potential problems in dental schools andraising awareness of occupational ... -
Comparison of radiopacity of current restorative CAD/CAM blocks with digital radiography
(WILEY, 2019)Objective While the radiopacity of restorative material affects the radiographic diagnosis of the teeth, there is no data about the radiopacity of current restorative computer-aided design (CAD)/computer-aided manufacturing ... -
Farklı adeziv primerlerin lityum disilikat cam seramik ile rezin siman arasındaki bağlanma dayanımına etkisi
(Selçuk Üniversitesi, 2020)Amaç: Bu çalışmanın amacı, farklı primer uygulamasına maruz bırakılan lityum disilikat seramiklerin bağlanma dayanım değerlerini değerlendirmektir. Gereç ve Yöntemler: 60 adet IPS e.max CAD seramik örnek, su soğutması ... -
Synergistic effect of thymoquinone and nystatin in the treatment of oral candidiasis; An in vitro study
(Springer, 2021)The effectiveness of antifungal agents may be insufficient against resistant strains in some cases of oral candidiasis. The aim of this study was to evaluate the antifungal effect of thymoquinone against Candidaalbicans, ...
